As is usual, these are two HP numbers for exactly the same part. The bare card you want off eBay can be bought new, by searching for part numbers 661320-001 or 663213-001. all parts of the card need to be activated with +5V DC for the driver installer to work properly. For example, google search for Z820 drivers, go to the W7Pro64 OS section, and in the Driver-Controller listing you'll find the drivers installer released 6/26/14 (SP65043).ĭo not try to load drivers until you have properly installed and powered the card up. The card you want is based on a Texas Instruments chipset, which is the same as is built into the Z620/Z820 motherboards, and thus the driver installer SoftPaq from HP for that is easy to find.
The older original card provided only 2 ports, at the rear, was based on a NEC chipset (which was sold off to Renasus), and is not really supported. It is the HP "2x2" card (2 ports at rear, potential for 2 ports out front via an on-card USB3 header). There are two HP USB 3.0 PCIe cards, only one of which you should buy. That will not include the 3.5" to 5.25" adapter kit detailed below. If you buy the whole kit from HP it will have a proper SATA power adapter to use, and that whole kit has Options part number QT587AA, costing about 70.00 with shipping. In a Z600 I put the card in the very top PCIe slot, just above the top video card. The Molex brand part number is 88751-1311. You can carve on the rubber some, or buy a perfect fitting adapter which I have located, via, made by Molex itself. the card will need a supplemental power source, and this HP card's SATA power connector has tolerances that precludes many SATA power adapters from fitting perfectly. The +5V DC that USB 2 and 3 lives on does not come up from the PCIe slots. You can run this card in a xw6400 or xw8400 but will only get about 1/2 USB 3 speeds. Same idea for the xw8400 versus the xw8600. So, in the xw6600 put the USB 3 card in the second (lower) PCIe x16 video slot so you get the bandwidth that at least matches what USB 3 can do. In the Z workstations the PCIe slots are at least Generation II, but for the xw workstations in the xw6400 none are, and in the xw6600 only the two PCIe x16 video slots are. I've been wanting to post this info for some time, and am building up a Z600 so took some pictures. Business PCs, Workstations and Point of Sale Systems.Printer Wireless, Networking & Internet.DesignJet, Large Format Printers & Digital Press.
0 kommentar(er)
